(2)In test mode ([Single feed] or [Multi-feed], the Hopper height changes as follows by pressing (Next button):

1.When the Hopper is at the bottom position, it moves up to 250 sheet position.

2.When the Hopper is at 250 sheet position, it moves down to the bottom position.

3.When the Hopper is at the highest position, it moves back to where it was when the scan operation started.

ATTENTION

Pressing (Previous button) does not change the position.

The Hopper is positioned at the bottom when the power is turned on.

HINT

1-8

 

 

 

 

 

 

 

 

 

 

 

1.3 Basic Operations of the Operator Panel