3)In case of (2) or (3), by pressing (Enter button), LCD display changes to <Screen5-1>.

<Screen5-1>

!

0 5

- 1

L

e n

g

t

h

=

1

0 / 1 5

/ 2

0

 

m m

4) At <Screen5-1>, by pressing (Left arrow button) or (Right arrow button),

the document length can be specified.

By pressing (Right arrow button), selection moves from (1) to (3).

By pressing (Left arrow button), selection moves from (3) to (1).

(1)[10] is blinking: The document length difference below 10mm is not detected as an error.

(2)[15] is blinking: The document length difference below 15mm is not detected as an error.

(3)[20] is blinking: The document length difference below 20mm is not detected as an error.

5)Press (Enter button) to confirm the setting.

Press (Exit button), and the LCD display goes back to [Ready] screen.

7-267.3 Setup Mode Details