-Punched holes are not allowed within 35mm (1.4 inch) of the vertical center line of the document.
-The deviation in the amount of the light transmitted through background areas must not be less than 10%.
Detection by Document Overlapping and Length
Sheets of the same thickness and length shall be set in the ADF at a time.
-Paper weight: 52 g/m2 - 127 g/m2 or 14 lbs to 34 lbs
-Document length deviation: 1% or less
-Printed area: 12% or less
-No black printed areas are allowed at the center area (26 x 10mm or 1 x 0.4 inch) at the leading edge of the document.
-Punched holes are not allowed within 35mm (1.4 inch) of the vertical center line of the document.
-The deviation in the amount of the light transmitted through background areas must not be less than 10%.
Detection by Document Thickness and Length
Sheets of the same thickness and length shall be set in the ADF at a time.
-Paper weight: 52 g/m2 - 127 g/m2 or 14 lbs to 34 lbs
-Document length deviation: 1% or less
-Printed area: 12% or less
-No black printed areas are allowed at the center area (26 x 10mm or 1 x 0.4 inch) at the leading edge of the document.
-Punched holes are not allowed within 35mm (1.4 inch) of the vertical center line of the document.
-The deviation in the amount of the light transmitted through background areas must not be less than 10%.
Detection by Document Overlapping, Thickness and Length
Sheets of the same thickness and length shall be set in the ADF at a time.
-Paper weight: 52 g/m2 - 127 g/m2 or 14 lbs to 34 lbs
-Document length deviation: 1% or less
-Printed area: 12% or less
-No black printed areas are allowed at the center area (26 x 10mm or 1 x 0.4 inch) at the leading edge of the document.
-Punched holes are not allowed within 35mm (1.4 inch) of the vertical center line of the document.