Fujitsu fi-4860C2 1.9 Scanning Documents, 3.Start up ScandAll, 4.Select the scanner to use, 1.Load the documents on the hopper, 2.Adjust the stacker table to the document size

1.9 Scanning Documents

For scanning with the VRS, a software provided with the scanner, refer to the VRS user’s manuals available in the VRS installation CD.

The following shows the procedure for scanning documents using the "ScandAll 21" application (simply called "ScandAll 21" from now on.)

1.Load the documents on the hopper.

For details on how to load documents, refer to the section "1 Loading Documents on the Hopper" on page 1-18.

2.Adjust the stacker table to the document size.

•For loading long documents on the hopper, extend the stacker extension.

ATTENTION

• For loading short documents on the hopper, adjust the stopper length.

3.Start up ScandAll 21

From [Start] menu, select [Program] - [Scanner Utility for Microsoft Windows] - [ScandAll 21]. This starts up ScandAll 21.

4.Select the scanner to use

Select [Select Source] from the [Scan] menu.

1

OPERATIONS SCANNER BASIC

1.9 Scanning Documents 1-23