Fujitsu fi-4860C2 Pressing, interface, (Left arrow button):, 7-54 7.3 Setup Mode Details, follows the settings done on the, “I/F” blinks and the scanner forcibly

4)At <Screen24-1>, press (Left arrow button) or (right arrow button), and select the setting you want to give priority.

Pressing	(Left arrow button):	“I/F” blinks and the scanner forcibly
		follows the settings done on the
		interface.

Pressing (Right arrow button): “Panel: Pre” or “Panel: Post” blinks and the scanner forcibly follows the settings done on the operator panel.

Press (Enter button) to confirm the setting.Press (Exit button) and the LCD display goes back to the [Ready] screen.

ATTENTION

This screen is displayed only when both imprinters (fi-486PRFR and fi-486PRRE) are installed.

7-547.3 Setup Mode Details