Fujitsu fi-4860C2 <Screen25-2, <Screen25-3, (1)[5] is blinking: 5 digit, (2)[8] is blinking: 8 digit, 7-56 7.3 Setup Mode Details

3)At <Screen25-1>, press (Left arrow button) or (Right arrow button) and let your choice of number of digits blink.

Selectable number of digits is listed as below.(1)[5] is blinking: 5 digit(2)[8] is blinking: 8 digitPress (Enter button), then <Screen25-2> is displayed.<Screen25-2>

!	2 5	-	2		S	t	a	r t C o u n t
=	0	0	0	0	0	0	0	0

4)At <Screen25-2>, specify the initial value of numbering.

By pressing (Left arrow button) or (Right arrow button), a digit position (blinking on LCD) can be specified.

By pressing (Next button) or (Previous button), the number at the digit can be changed.

After putting a initial value for the numbering counter, press (Enter button) to confirm the initial number. Then, <Screen25-3> is displayed.

HINT

<Screen25-3>

! 2 5 - 3	E m	p t	y R e s e t
=	O n /	O f	f

Initial number can be increased up to the maximum number (5digit: 99,999 / 8digit: 16,777,215).

7-567.3 Setup Mode Details