At this screen, press (Left arrow button) or (Right arrow button) and select scan resolution. Following parameters can be specified.

200:Scan at 200 dpi

240:Scan at 240 dpi

300:Scan at 300 dpi

400:Scan at 400 dpi

Press (Enter button) and confirm the setting. Then <Screen51-2> is redisplayed.

(5) Press (Enter button). Then <Screen51-1> is redisplayed.

At <Screen51-1>, select [START] and press (Start button).

If fi-486PRFR and/or fi-486PRREis installed, <Screen51-3> is displayed for setting imprinter test conditions.

If an imprinter(s) is not installed, the scanner starts scanning operations.

<Screen51-3>

P

r i n

t

= O f f /

O n :

P r e / P o s t

6)At this screen, press (Left arrow button) or (Right arrow button) and:

Select [On] to do imprinter test while scanning.

Then, select the imprinter to use.

If the printer to use is fi-486PRFR, select [Pre].

If fi-486PRRE, select [Post].

If imprinter test is not required, select [Off].

7

MENUS PANEL OPERATOR

7.5 Test Mode Details 7-79