6.When [Hopper Empty] is displayed, press (Stop button).

7.Place the same cleaning sheet on the hopper table with adhesive side up

by aligning the right side with the hopper guide. Press (Start button), then the cleaning sheet is fed.

3

CARE DAILY

8. When "Hopper Empty" is displayed, press (Stop button).

9.Remove the protective paper from a new cleaning sheet and place it with the adhesive side face down on the hopper table, aligning the left side

with the hopper guide. Press (Start button), then the cleaning sheet is fed.

Repeat steps 6 through 8. When the cleaning is completed turn off the power.

3.3 Cleaning the Rollers

 

3-9