27.Setting Power save mode

1)Press (Next button) or (Previous button) and let LCD display <Screen27>.

<Screen27>

! 2 7

P o w e r

S a v e

=

 

 

2)At <Screen27>, press (Left arrow button) or (Right arrow button)and select [On] to use power save mode.

Next, press (Enter button). Then the LCD display shows <Screen27-1>.

If power save mode is not required, press (Right arrow button) and select

[Off].Then, press (Enter button).

<Screen27-1>

!

2 7 -

1

T i

m

e

=

1

0

1

5

2 0 m i n

3)At <Screen27-1> ,by pressing (Left arrow button) or (Right arrow button), select the scanner wait idle time before entering power save mode.

The blinking item is the one selected.

HINT

A minimum of 5 minutes to the maximum of 60 minutes can be selected with 5 minutes increment.

The default time recommended by the ENERGY STAR® program is 15 min-

HINTutes.

4)Press (Enter button) and enable to use power save mode. Finally, press

(Exit button) and the LCD display goes back to [Ready] screen.

7-607.3 Setup Mode Details