Continued from the previous page

Are the Pick roller unit and the Brake roller unit installed properly?

YES

Have you scanned many sheets? Check the consumables life to ensure you have not scanned more than 300,000 sheets. (* 7)

NO

Contact an authorized FUJITSU Scanner service provider.

NO

YES

nstall the Pick roller and the Brake roller properly. (* 6)

Replace the Pick roller unit and the Brake roller unit if necessary. (*6)

(* 1) For the details on required conditions, refer to the section "6.2 Document Quality" on page 6-3.

(* 2) For the double-feed detection conditions, refer to "APPENDIX 2 DOUBLE- FEED (MULTI-FEED) DETECTION CONDITIONS" on page AP-2.

(* 3), (* 5) For the details on how to clean scanner, refer to "Chapter 3 DAILY CARE" on page 3-1.

(* 4) For the details on how to replace Pas ASSY, refer to "4 REPLACEMENT OF CONSUMABLES" on page 4-1.

(* 6) For the details on how to replace and install Pick roller unit and Brake roller unit, refer to "4 REPLACEMENT OF CONSUMABLES" on page 4-1.

(* 7) Check the wear of rollers. For the method to check the number of sheets scanned for each consumable, refer to “7.3 Setup Mode Details”, “9. Abrasion counter reset” on page 7-33.

5-225.2 Troubleshooting