3)At <Screen8-1>, press (Left arrow button) or (Right arrow button) to select consumable error process.

(1) [Stop] is blinking:

When the consumables replacement limit is

 

reached, the Consumables replacement mes-

 

sage (Abrasion alarm) is shown on the LCD and

 

scanning stops.

(2)[Message] is blinking: When the consumables replacement limit is reached, the Consumables replacement mes- sage (Abrasion alarm) is shown on the LCD but the scanning continues.

By pressing (Enter button), <Screen8-2> appears on the LCD.

<Screen8-2>

!

0 8 -

2

A

l a

r m

C N

T

=

3 0

0 0

0 0

s h e e

t

4)At <Screen8-2>, specify the number of scans to get Consumables replacement message.

Each time (Left arrow button) is pressed, the counter value decrements by 10,000.

Each time (Right arrow button) is pressed, the counter value increments by 10,000.

5)Press (Enter button) to confirm the setting.

Press (Exit button) , and the LCD display goes back to [Ready] screen.

7-327.3 Setup Mode Details