Fujitsu fi-4860C2 8.3 fi-486PRRE (Post-imprinter), 8-4 8.3 fi-486PRRE (Post-imprinter)

8.3 fi-486PRRE (Post-imprinter)

The fi-486PRRE is installed at the rear side of the document path, inside of the scanner. It prints after the scanning. The fi-486PRRE (Post-imprinter) Specifications are described below.

Item		Descriptions
Printing Method	Thermal Ink Jet
Printable characters	Alphabet letters : A to Z, a to z
	Numeric characters: 0,1 to 9
	Symbols : ! ” # $ % & ’ ( ) * + , - . / : ; < = > ? @ [ ¥ ] ^ _				{ }
Maximum printable	40
characters per line
Character size	Height 2.91 mm (0.11 inch) x Width 2.82 mm (0.11 inch)
Character pitch	Approximately 3.53 mm (8 characters/inch)
Printing area	Printable area is shown as below.
			Ducument Reference Position
	A: 43 mm (1.7 inch) or more
	B: 100.5 mm (3.9 inch) or less		document				E
	C: 5 mm (0.2 inch) or more
	D: 140.5 mm (5.5 inch) or less		Centerof	direction	Printing
	E : 5 mm (0.2 inch) or more
	(Max. 40 column)
				Document feeding	Area (Back)		D
							C
				A		B
Consumables	Print Cartridge

As for the operations and functions of fi-486PRRE (Post-imprinter), refer to the fi-486PRRE Operator's Guide attached to fi-486PRRE.

8-48.3 fi-486PRRE (Post-imprinter)