Interface
device to starting of the sector data transfer. Note that the host does not need to read the Status register for the reading of a single sector or the last sector in
When the host new command even if the device requests the data transfer (setting in DRQ bit), the correct device operation is not guaranteed.
Figure 5.4 Protocol for command abort
5.4.2 PIO Data transferring commands from host to device
The execution of the following commands involves Data transfer from the host to the drive.
•
•
•
•
•
•
•
•
•
WRITE SECTOR(S)
WRITE LONG
WRITE BUFFER
WRITE VERIFY
SMART WRITE LOG SECTOR
SECURITY DISABLE PASSWORD
SECURITY ERASE UNIT
SECURITY SET PASSWORD
SECURITY UNCLOK
