Fujitsu MHN2200AT, MHN2150AT, MHN2100AT, MHN2300AT manual Signal assignment on the connector

5.1 Physical Interface

5.1.2 Signal assignment on the connector

Table 5.1 shows the signal assignment on the interface connector.

Table 5.1 Signal assignment on the interface connector

Pin No.	Signal	Pin No.	Signal
A	MSTR	B	MSTR/ENCSEL
C	unused	D	ENCSEL
E	(KEY)	F	(KEY)
1	RESET–	2	GND
3	DATA7	4	DATA8
5	DATA6	6	DATA9
7	DATA5	8	DATA10
9	DATA4	10	DATA11
11	DATA3	12	DATA12
13	DATA2	14	DATA13
15	DATA1	16	DATA14
17	DATA0	18	DATA15
19	GND	20	(KEY)
21	DMARQ	22	GND
23	DIOW-, STOP	24	GND
25	DIOR-, HDMRDY,	26	GND
	HSTROBE
27	IORDY, DDMARDY,	28	CSEL
	DSTROBE
29	DMACK–	30	GND
31	INTRQ	32	reserved (IOCS16-)
33	DA1	34	PDIAG–, CBLID–
35	DA0	36	DA2
37	CS0–	38	CS1–
39	DASP–	40	GND
41	+5 VDC	42	+5 VDC
43	GND	44	unused

C141-E120-02EN 5-3