Fujitsu MHN2300AT, MHN2150AT, MHN2100AT manual Information to be read by Identify Device command 3

Interface

Table 5.4 Information to be read by IDENTIFY DEVICE command (3 of 8)

Word		Value			Description
85	*13			Valid of command sets/function *13
86	*14			Valid of command sets/function *14
87	*15			Default of command sets/function *15
88	X’xx3F’			Ultra DMA transfer mode *16
89	Set by a device			Security Erase Unit execution time (Unit: 2 min.)
90	X’0000’			Enhanced Security Erase Unit execution time (Unit: 2 min.)
91	(Variable)			Advance power management level
92	(Variable)			Master password revision
93	*17			Hardware configuration *17
94	(Variable)			Acoustic Management level
95-127	X’0000’			Reserved
128	(Variable)			Security status	*18
129-159	X’0000’			Undefined
160-254	X’0000’			Reserved
255	X’xxA5’			Check sum (The 2 complement of the lower order byte
				resulting from summing bits 7 to 0 of word 0 to 254 and
				word 255, in byte units.)
	*1 Word 0: General configuration
		Bit 15:		ATA device = 0, ATAPI device = 1
		Bit 14-8:		Undefined
		Bit 7:		Removable disk drive = 1
		Bit 6:		Fixed drive = 1
		Bit 5-3:		Undefined
		Bit 2:		IDENTIFY DEVICE Valid = 0
		Bit 1-0:		Reserved
	*2 Word 1, 3, 6, 60-61
				MHN2300AT	MHN2200AT	MHN2150AT	MHN2100AT
		Word 01		X’3FFF’	X’3FFF’	X’3FFF’	X’3FFF’
		Word 03		X’10’	X’10’	X’10’	X’10’
		Word 06		X’3F’	X’3F’	X’3F’	X’3F’
		Word 60-61		X’37E3E40’	X’2542980’	X’1C21B00’	X’12BB230’
	*3 Word 49:		Capabilities
		Bit 15-14:		Reserved

5-34 C141-E120-02EN