Device Overview

1.1 Features

1.1.1 Functions and performance

The following features of the MHN Series are described.

(1) Compact

The MHN2300AT, MHN2200AT, MHN2150AT and MHN2100AT have 1 disk or 2 disks of 65 mm (2.5 inches) diameter, and its height is 9.5 mm (0.374 inch).

(2) Large capacity

The disk drive can record up to 15 GB (formatted) on one disk using the 16/17 MTR recording method and 15 recording zone technology. The MHN Series has a formatted capacity of 30 GB (MHN2300AT), 20 GB (MHN2200AT), 15 GB (MHN2150AT) and 10 GB (MHN2100AT) respectively.

(3) High-speed Transfer rate

The disk drives (the MHN Series) have an internal data rate up to 30.7 MB/s. The disk drive supports an external data rate up to 100 MB/s (U-DMA mode 5).

(4) Average positioning time

Use of a rotary voice coil motor in the head positioning mechanism greatly increases the positioning speed. The average positioning time is 12 ms (at read).

1.1.2 Adaptability

(1) Power save mode

The power save mode feature for idle operation, stand by and sleep modes makes The disk drives (the MHN Series) ideal for applications where power consumption is a factor.

(2) Wide temperature range

The disk drives (the MHN Series) can be used over a wide temperature range (5°C to 55°C).

(3) Low noise and vibration

In Ready status, the noise of the disk drives (the MHN Series) is only about 24 dBA (measured at 1 m apart from the drive under the idle mode).

(4) High resistance against shock

The Load/Unload mechanism is highly resistant against non-operation shock up to 7840 m/s2 (800G).

1-2

C141-E120-02EN

Page 22
Image 22
Fujitsu MHN2300AT, MHN2150AT, MHN2100AT, MHN2200AT manual Features, Functions and performance, Adaptability