Illustrations, Figures | Fujitsu MHN2300AT, MHN2150AT, MHN2100AT

Illustrations

Figure 1.1	Current fluctuation (Typ.) at +5V when power is turned on 1-7
Figure 2.1	Disk drive outerview			2-2
Figure 2.2	Configuration of disk media heads					2-3
Figure 2.3	1 drive system configuration				2-4
Figure 2.4	2 drives configuration			2-4
Figure 3.1	Dimensions	3-2
Figure 3.2	Orientation 3-3
Figure 3.3	Mounting frame structure 3-4
Figure 3.4	Location of breather			3-5
Figure 3.5	Surface temperature measurement points						3-6
Figure 3.6	Service area	3-7
Figure 3.7	Handling cautions		3-8
Figure 3.8	Connector locations			3-9
Figure 3.9	Cable connections		3-10
Figure 3.10	Power supply connector pins (CN1)					3-11
Figure 3.11	Jumper location		3-11
Figure 3.12	Factory default setting			3-12
Figure 3.13	Jumper setting of master or slave drive						3-12
Figure 3.14	CSEL setting	3-13
Figure 3.15	Example (1) of Cable Select				3-13
Figure 3.16	Example (2) of Cable Select				3-14
Figure 4.1	Head structure	4-3
Figure 4.2	Power Supply Configuration				4-5
Figure 4.3	Circuit Configuration			4-6
Figure 4.4	Power-on operation sequence				4-8
Figure 4.5	Read/write circuit block diagram					4-12
Figure 4.6	Frequency characteristic of programmable filter							4-13
Figure 4.7	Block diagram of servo control circuit						4-15
Figure 4.8	Physical sector servo configuration on disk surface							4-19
Figure 4.9	Servo frame format			4-20
Figure 5.1	Interface signals		5-2

xiv	C141-E120-02EN