FIGURES
|
| page | |
1.1 | Current fluctuation (Typ.) at +5V when power is turned on | 1 - 7 | |
2.1 | Disk drive outerview | 2 | - 1 |
2.2 | Configuration of disk media heads | 2 | - 3 |
2.3 | 1 drive system configuration | 2 | - 4 |
2.4 | 2 drives configuration | 2 | - 5 |
3.1 | Dimensions | 3 | - 2 |
3.2 | Orientation | 3 | - 3 |
3.3 | Limitation of | 3 | - 4 |
3.4 | Mounting frame structure | 3 | - 4 |
3.5 | Surface temperature measurement points | 3 - 5 | |
3.6 | Service area | 3 | - 6 |
3.7 | Connector locations | 3 | - 7 |
3.8 | Cable connections | 3 | - 8 |
3.9 | Power supply connector pins (CN1) | 3 - 9 | |
3.10 | Jumper location | 3 | - 9 |
3.11 | Factory default setting | 3 | - 10 |
3.12 | Jumper setting of master or slave device | 3 | - 10 |
3.13 | Jumper setting of Cable Select | 3 | - 11 |
3.14 | Example (1) of Cable Select | 3 | - 11 |
3.15 | Example (2) of Cable Select | 3 | - 11 |
4.1 | Head structure | 4 | - 2 |
4.2 | MPA30xxAT Block diagram | 4 - 5 | |
4.3 | 4 - 7 | ||
4.4 | Read/write circuit block diagram | 4 | - 11 |
4.5 | Frequency characteristic of programmable filter | 4 - 12 | |
4.6 | PR4 signal transfer | 4 | - 13 |
4.7 | Block diagram of servo control circuit | 4 - 16 | |
4.8 | Physical sector servo configuration on disk surface | 4 - 17 | |
4.9 | Servo frame format | 4 | - 19 |
5.1 | Interface signals | 5 | - 2 |
5.2 | Execution example of READ MULTIPLE command | 5 - 19 | |
5.3 | Read Sector(s) command protocol | 5 - 56 | |
xi |
