![](/images/new-backgrounds/1170186/170186199x1.webp)
Removing and installing components during servicing
Attaching the cover
2 |
1 |
1 |
►Place the cover in the correct mounting position (1).
►Fasten the screws (2).
►Replace the dust chamber cover (see "Removing and fitting the dust removal cover (ventilation slot cover)", Page 62).
Finishing component removal
After you have removed or changed the system components as you required, please prepare your device for operation again as follows:
►Install the battery again (see "Installing a battery", Page 55).
►Turn the notebook the right way up again and place it on a flat surface.
►Reconnect the cables that you disconnected before.
96 | Fujitsu Technology Solutions |