Working with the notebook
Key combinations
Key combinations cannot be changed.
You can find information on programming the tablet buttons in "Programming the tablet buttons", Page 52.
Shortcut
4 |
| 1 |
| + | A |
|
| |
4 |
| 2 |
| + | B |
|
| |
4 |
| 3 |
+ 
Meaning
Starting predefined application A
This button allows you to start a previously defined application.
By default, the button is preconfigured to start the Launch Center application.
Starting predefined application B
This button allows you to start a previously defined application.
By default, the button is preconfigured to start the Windows Journal application.
Toggle output screen
Use this key combination to select which screen(s) is/are used for display if an external monitor is connected.
Screen output is possible:
•only on the notebook’s LCD screen
•only on the external monitor
•both the LCD screen and the external monitor.
Press the key combination several times to switch through all possible settings.
If you have connected two external monitors to the port replicator, the following display outputs are possible:
•only on the notebook’s LCD screen
•just the external monitor (analogue)
•simultaneously on the LCD screen (digital)
•both the LCD screen of the notebook and the external monitor (analogue)
You cannot switch output to both external monitors on the Port Replicator via the key combination.
The tablet button 
has a practical delay function: This allows you to press the two buttons for a shortcut one after the other instead of needing to press
them both at the same time. After pressing the 
tablet button, you have a short time (2 to 3 seconds) to press the second button.
Fujitsu Technology Solutions | 51 |
