Working with the notebook | Fujitsu T4410, T4310 instruction

Working with the notebook

Removing and ﬁtting the dust removal cover (ventilation slot cover)

In order to ensure optimum cooling of the components in your notebook, you should periodically clean the ventilation slot of the heatsink.

This ensures optimum fan performance. You can achieve the best cleaning results with a small hand-held vacuum cleaner.

If necessary, you can also use a dry brush to release dust from the ventilation slots. Do not use any cleaning liquids! Ensure that no liquid enters the device.

Be sure that you do not damage the ventilation blades in the process. Do not use any abrasives for cleaning purposes.

To avoid overheating of the device, do not remove the ventilation slot cover when the device is switched on.

►Prepare for removal, see chapter "Preparing to remove components", Page 90.

2

1

1

►Press and hold the lock of the ventilation slot cover (1) and remove it from its slot (2).

►Clean the dust chamber with a dry brush.

►Insert the ventilation slot cover into the slot (1) at an angle as shown, and ensure that you feel it click into place.

►Complete the removal, see chapter "Finishing component removal", Page 96.

62	Fujitsu Technology Solutions

Image 66

Fujitsu T4410, T4310 manual Working with the notebook

Contents

Lifebook T4310 / T4410 Page Page Copyright Lifebook T4310 / T4410 Operating ManualPage Contents Connecting external devices Removing and installing components during servicing 107 110 Innovative technology Further informationInnovative technology Not switch off the device Notational conventionsThis font Ports and controls Ports and controls Ports and controls Ports and controls Ports and controls Ports and controls Energy saving Safety notesImportant notes Energy saving under Windows When travelling in other countries Travelling with your notebookBefore you travel Cleaning the notebook First-time setup of your device First-time setup of your deviceUnpacking and checking the device Mains adapter connecting Selecting a location Switching on the device for the ﬁrst time Status indicators Working with the notebookWorking with the notebook Battery charging indicator Power supply indicatorDrive indicator Battery indicator Opening the notebook Switching on the notebook Programming the ON/OFF switch Different ways to use your notebook From notebook to Tablet PC Working with the notebook Working with the notebook Windows XP Windows VistaWindows From Tablet PC to notebook Working with the notebook Switching off the notebook Closing the notebook Language selection Windows XP onlySelecting the language for menu texts Handwriting recognition under Windows Vista Handwriting recognition under Windows Example LCD screenAmbient light sensor Background lighting Using the device as a Tablet PC Using ﬁngers Contracting and extending ScrollingDragging Rotating Using the stylus pen Reducing a view Handling Mouse Pen Setting the pen Calibrating the penOperating system Menu Installing a pen cord Replacing the pen tip Touchpad and touchpad buttons Using the device as a notebookExecuting commands Moving the pointer Switching the Touchpad on and off KeyboardDragging items Tab key Key Working with the notebookDescription Backspace key Enter key return Cursor keys Virtual numeric keypadWorking with the notebook Key Description Fn button Start key Country and keyboard settings Key combinations Halt current operation Back tab Tablet buttons ENT Basic function Change screen orientation Functions when the security system is activeWorking with the notebook Button Open Fujitsu menu Functions during Windows log-on Button Function Fn key, see Key combinations, Shortcut Meaning Starting predeﬁned application a Starting predeﬁned application B Rechargeable battery WebcamProgramming the tablet buttons Charging, caring for and maintaining the battery Monitoring the battery charging levelBattery storage Removing and installing the battery Removing a battery Installing a battery LED indicator State of charge Batteries with a capacity of 5800 mAh Module Removing a module Installing a module Optical drive CD/DVD indicator Handling data carriers Inserting or removing a data carrier Manual removal emergency removal Working with the notebook Using the power-management features Memory cards Supported formatsInserting the memory card ExpressCards Removing the memory card Inserting the card Loudspeakers and microphones Removing the card SIM card Inserting the SIM cardRemoving a SIM card Wireless LAN / Bluetooth / Umts Switching the wireless components on and off Setting up Wlan access Access via UmtsEthernet and LAN Your Port Replicator Ports on the Port Replicator Working with the notebook Connecting the notebook to the Port Replicator Connecting the mains adapter to the Port Replicator Switching on the notebook via the port replicatorSwitching off notebook via Port Replicator Disconnecting the notebook from the Port Replicator Security functions Brief overview of security functionsSecurity functions Type of protection Preparation Conﬁguring the ﬁngerprint sensor Use Kensington Lock Conﬁguring password protection in Bios Setup Utility Protecting Bios Setup Utility supervisor and user passwordSetting supervisor and user password Removing passwords Password protection for booting of the operating systemChanging the supervisor or user password Activating system protection Setting the User password Using the security function of the tablet keysSetting the Supervisor password Entering passwords using the tablet buttons SmartCaseTM Logon+ Options for using the TPMTrusted Platform Module TPM device-dependent Security API Enabling TPM Disabling TPM Connecting devices to the notebook Connecting external devicesConnecting external devices Disconnecting devices from the notebook Connecting an external monitor Hdmi port Connecting USB devices How to remove USB devices correctlyDevice drivers Connecting FireWire devices Connecting external audio devicesMicrophone port / Line Headphone port Removing and installing components during servicing Removing and installing components during servicing Installing and removing memory expansion Preparing to remove components Removing a cover Removing memory modules Installing a memory module Attaching the cover Removing and installing the hard disk Removing a hard disk Installing a hard disk Finishing component removal Operating Bios Setup Utility Settings in Bios Setup UtilityStarting the Bios Setup Utility Settings in Bios Setup Utility Exiting Bios Setup Utility Load Setup Defaults Copy Standard EntriesSave Changes and Power Off Troubleshooting and tips Troubleshooting and tips Help if problems occur Restoring the hard disk contents under Windows Cause Fault elimination Battery indicator does not illuminateTroubleshooting and tips Cause Cause Troubleshooting LCD screen is difﬁcult to read External monitor remains blankExternal monitor is blank or the image is unstable Cursor does not correctly follow the pen movements Printer does not print Radio connection to a network does not work Error message/cause Resolution Battery discharges too quicklyError messages on the screen Acoustic warnings Troubleshooting and tips Error message/cause Resolution Technical data Technical data Port Replicator optionalAmbient conditions Mains adapter Energy Star Tested safety GS, valid only for Lifebook T4410Manufacturer’s notes Disposal and recycling Regulatory information for notebooks without radio device CE markingRegulatory notices CE marking for devices with radio component 112 DOC Industry Canada notices Avis Aux Utilisateurs Du Réseau Téléphonique Canadien UL Notice For Authorized Repair Technicians Only FCC Interference Statement FCC Regulatory information for notebooks with radio deviceFederal Communications Commission statement FCC Radio Frequency Exposure statement Manufacturer’s notes Regulatory Information/Disclaimers Export restrictions Fault IndexIndex Index Handling Index Index