Handling data carriers, CD/DVD indicator | Fujitsu T4410, T4310

Working with the notebook

Handling data carriers

Observe the following guidelines when handling data carriers:

•Avoid touching the surface of a data carrier. Only handle data carriers by their edges.

•Always store data carriers in their cases. This will protect the data carrier against being covered in dust, scratched or damaged in any other way.

•Protect your data carriers against dust, mechanical vibrations and direct sunlight.

•Avoid storing a data carrier in areas subject to high temperatures or humidity.

You may use both 8-cm and 12-cm data carriers in the optical drive.

When using a data carrier of lesser quality, vibrations and reading errors may occur.

CD/DVD indicator

The CD/DVD indicator ﬂashes when a data carrier is inserted. The indicator goes out when the drive is ready for reading. The indicator lights up when the drive is being accessed. You may only remove the data carrier when the indicator is unlit.

If the CD/DVD indicator does not go out after a data carrier has been inserted, but instead continues to ﬂash, this means that the drive cannot access the data carrier.

Either the data carrier is damaged or dirty or you are using a data carrier that the drive cannot read.

60	Fujitsu Technology Solutions

Image 64

Fujitsu T4410, T4310 manual Handling data carriers, CD/DVD indicator

Contents

Lifebook T4310 / T4410 Page Page Copyright Lifebook T4310 / T4410 Operating ManualPage Contents Connecting external devices Removing and installing components during servicing 107 110 Further information Innovative technologyInnovative technology Notational conventions Not switch off the deviceThis font Ports and controls Ports and controls Ports and controls Ports and controls Ports and controls Ports and controls Safety notes Important notesEnergy saving Energy saving under Windows Travelling with your notebook When travelling in other countriesBefore you travel Cleaning the notebook First-time setup of your device First-time setup of your deviceUnpacking and checking the device Mains adapter connecting Selecting a location Switching on the device for the ﬁrst time Working with the notebook Status indicatorsWorking with the notebook Power supply indicator Drive indicatorBattery charging indicator Battery indicator Opening the notebook Switching on the notebook Programming the ON/OFF switch Different ways to use your notebook From notebook to Tablet PC Working with the notebook Working with the notebook Windows Vista Windows XPWindows From Tablet PC to notebook Working with the notebook Switching off the notebook Language selection Windows XP only Closing the notebookSelecting the language for menu texts Handwriting recognition under Windows Vista Handwriting recognition under Windows LCD screen Ambient light sensorExample Background lighting Using the device as a Tablet PC Using ﬁngers Scrolling DraggingContracting and extending Rotating Using the stylus pen Reducing a view Handling Mouse Pen Calibrating the pen Setting the penOperating system Menu Installing a pen cord Replacing the pen tip Using the device as a notebook Executing commandsTouchpad and touchpad buttons Moving the pointer Keyboard Switching the Touchpad on and offDragging items Key Working with the notebook Description Backspace keyTab key Enter key return Virtual numeric keypad Working with the notebook Key Description Fn buttonCursor keys Start key Country and keyboard settings Key combinations Halt current operation Back tab Tablet buttons ENT Functions when the security system is active Working with the notebook ButtonBasic function Change screen orientation Open Fujitsu menu Functions during Windows log-on Button Function Fn key, see Key combinations, Shortcut Meaning Starting predeﬁned application a Starting predeﬁned application B Webcam Rechargeable batteryProgramming the tablet buttons Monitoring the battery charging level Charging, caring for and maintaining the batteryBattery storage Removing and installing the battery Removing a battery Installing a battery LED indicator State of charge Batteries with a capacity of 5800 mAh Module Removing a module Installing a module Optical drive CD/DVD indicator Handling data carriers Inserting or removing a data carrier Manual removal emergency removal Working with the notebook Using the power-management features Supported formats Memory cardsInserting the memory card ExpressCards Removing the memory card Inserting the card Loudspeakers and microphones Removing the card Inserting the SIM card SIM cardRemoving a SIM card Wireless LAN / Bluetooth / Umts Switching the wireless components on and off Access via Umts Setting up Wlan accessEthernet and LAN Your Port Replicator Ports on the Port Replicator Working with the notebook Connecting the notebook to the Port Replicator Switching on the notebook via the port replicator Connecting the mains adapter to the Port ReplicatorSwitching off notebook via Port Replicator Disconnecting the notebook from the Port Replicator Brief overview of security functions Security functionsSecurity functions Type of protection Preparation Conﬁguring the ﬁngerprint sensor Use Kensington Lock Protecting Bios Setup Utility supervisor and user password Conﬁguring password protection in Bios Setup UtilitySetting supervisor and user password Password protection for booting of the operating system Changing the supervisor or user passwordRemoving passwords Activating system protection Using the security function of the tablet keys Setting the Supervisor passwordSetting the User password Entering passwords using the tablet buttons Options for using the TPM Trusted Platform Module TPM device-dependentSmartCaseTM Logon+ Security API Enabling TPM Disabling TPM Connecting external devices Connecting external devicesConnecting devices to the notebook Disconnecting devices from the notebook Connecting an external monitor Hdmi port How to remove USB devices correctly Connecting USB devicesDevice drivers Connecting external audio devices Connecting FireWire devicesMicrophone port / Line Headphone port Removing and installing components during servicing Removing and installing components during servicing Installing and removing memory expansion Preparing to remove components Removing a cover Removing memory modules Installing a memory module Attaching the cover Removing and installing the hard disk Removing a hard disk Installing a hard disk Finishing component removal Settings in Bios Setup Utility Starting the Bios Setup UtilityOperating Bios Setup Utility Settings in Bios Setup Utility Load Setup Defaults Copy Standard Entries Exiting Bios Setup UtilitySave Changes and Power Off Troubleshooting and tips Troubleshooting and tips Help if problems occur Restoring the hard disk contents under Windows Battery indicator does not illuminate Troubleshooting and tips CauseCause Fault elimination Cause Troubleshooting External monitor remains blank LCD screen is difﬁcult to readExternal monitor is blank or the image is unstable Cursor does not correctly follow the pen movements Printer does not print Radio connection to a network does not work Battery discharges too quickly Error messages on the screenError message/cause Resolution Acoustic warnings Troubleshooting and tips Error message/cause Resolution Technical data Port Replicator optional Technical dataAmbient conditions Mains adapter Tested safety GS, valid only for Lifebook T4410 Manufacturer’s notesEnergy Star Disposal and recycling CE marking Regulatory noticesRegulatory information for notebooks without radio device CE marking for devices with radio component 112 DOC Industry Canada notices Avis Aux Utilisateurs Du Réseau Téléphonique Canadien UL Notice For Authorized Repair Technicians Only FCC Regulatory information for notebooks with radio device Federal Communications Commission statementFCC Interference Statement FCC Radio Frequency Exposure statement Manufacturer’s notes Regulatory Information/Disclaimers Export restrictions Index FaultIndex Index Handling Index Index