
Working with the notebook
Connecting the mains adapter to the Port Replicator
1
3
2
►Connect the mains adapter cable to the DC jack (DC IN) of the Port Replicator (1).
►Connect the power cable to the mains adapter (2).
►Plug the power cable into the mains socket (3).
When the notebook is connected to a Port Replicator, the operating system creates a hardware profile for the "Docked" mode. In this profile, for example, the setting is saved as to which monitor was last used for output. This profile will be loaded, as soon as the notebook is connected to a Port Replicator of the same type.
Switching on the notebook via the port replicator
► Press the ON/OFF switch on the port replicator to switch the notebook on.
The
Switching off notebook via Port Replicator
►Close all applications and shut down your operating system (please refer to the manual for the operating system).
If the notebook cannot be shut down properly, press the ON/OFF button on the Port Replicator for approx. four seconds. The notebook will switch off. Any unsaved data may however be lost.
74 | Fujitsu Technology Solutions |