Working with the notebook
Replacing the pen tip
With use, the pen tip may become worn or may pick up foreign particles that can scratch the screen. A damaged or worn tip may not move freely, causing unpredictable results when using the pen.
If problems like these occur with your pen, you should replace the pen tip. To do this, use the pen tip removal tool included with your pen.
► Position the tip in the gap between the two ends of the tool to remove the tip.
► Pinch the two ends of the tip changer together so that the tip is firmly clasped (1), then pull it from the barrel.
► Use one of the new tips that were supplied with your pen to replace the tip. Insert the flat end of the tip into the barrel and push it in firmly until it is in place.
1
1 1
Do not continue to use a tip which is worn or damaged.
Installing a pen cord
You should attach the pen with a pen cord to prevent accidentally dropping or losing it.
►Attach the end of the pen cord with the smaller loop to your pen.
►Attach the end of the pen cord with the larger loop to your notebook.
40 | Fujitsu Technology Solutions |
