Furuno FR-2125V installation manual Clamp position

Right Lower Cover (7)

Monitor

J582

J581

Control Head Cable

Clamp

Remove clamp from left side

Remove clamp from rear side

Figure 1-14 Clamp position

11.Unfasten four upset screws (6) at the bottom of the right and left KB arms to dismount the control head.

12.Unfasten three screws (M4X10) and two screws (M4X8) to remove the right lower cover (7) and the left lower cover (8).

Pan-head Screw (M4X10, 3 pcs., upper)

Binding Screw (M4X8, 2 pcs., lower)

Left Lower Cover (8)

Control Head

Right KB Arm

Upset Screw (6) (M5X25, 4 pcs., including those on

opposite side)Pan-head Screw (M4X10, 3 pcs., upper) Binding Screw (M4X8, 2 pcs., lower)

Figure 1-15 Display unit, front view

1-11