1.Open the monitor and fix it with the stay. See page 1-5 for instructions.
2.Fasten the M-card base assy. with one M4X8 pan-head screw as below.
Fasten with
M4 x 8 screws.
Fasten with M3 x 8 screws (2 pcs.)
Figure 4-12 Display unit, inside view
3.Fasten the ground wire with the M3X8 pan-head screw and M3 teethed lock washer.
4.Fix the M-card case assy. with two M3X8 pan-head screws.
5.Set the M-card case cover to the hole in the front panel and fix with two M2.6X5 pan-head screws.
| Pan-head screw B |
Pan-head screw A | M4X8 |
M-card base assy. |
M3X8 | |
Teethed lock washer | |
M3 | |
8
1
Pan-head screw
M2.6X5, 2 pcs.
Pan-head screw B
Pull forwardM3X8, 2 pcs. and fix.
M-card case cover
Figure 4-13 Display pedestal, front view
