Furuno FR-2125V installation manual RP Board RP-26, Table top/console type

	CR12 TRG	#4	#3	#2	#1
CR16 LOG	CR11 VID	OFF	OFF	OFF	OFF
	CR10 BRG
CR15 GYRO
	CR9 HDG

S1

Figure 4-8 ARP Board (18P9002B)

4.3 RP Board RP-26

The RP Board RP-26, which provides video plotter functions, consists of a circuit board and a card drive, both of which are accommodated in the display unit. Note that the RP-26 is not available with the statute mile-type radar.

Table top/console type

Necessary Parts: RP-26-T-2E (Code No. 008-485-520)

Name	Type	Qty	Code No.	Remarks
				IF Board, Cable assy.,
M-Card Base Assy.	—	1	—	M-card base assy.,
				M-card lid, M-card case,
				M-card cover
RP Board	14P0298	1	008-487-640
Pan-head Screw B	M4X8 C2700W	4	000-881-445
Pan-head Screw B	M3X8 C2700W	2	000-881-404	Not used
Pan-head Screw A	M2.6X5 C2700W	2	000-800-973	Not used
Pan-head Screw A	M3X8 C2700W	1	000-881-104	Not used
Teethed lock washer	M4 C5191W	1	000-864-506
Teethed lock washer	M3 C5191W	1	000-864-504	Not used

1. Open the monitor and fix it with the stay. See page 1-5 for instructions

4-10