Furuno FR-2125V installation manual Fabricating the DC power cable CVV-S 8X2C, option

Fabricating the DC power cable (CVV-S 8X2C, option)

1.Remove the vinyl sheath by 100 mm.

2.Unravel the braided shield 60 mm from end of cable.

3.Remove the jute tape and inclusion from cable.

4.Expose the cores by 50 mm.

5.Expose the shield by 60 mm. Tape 10 mm of the shield tip.

6.Remove the sheath of cores by 10 mm. Attach crimp-on lugs type 8NK4 to the cores and crimp-on lug type FV5.5-4 (yellow) to the shield.

7.Tape the cable as shown in the figure below. Fasten the shield to screw (M4) on the cable clamp.

100 mm

CVV-S 8X2C

Braided Shield

60 mm

Core

Jute Tape

Inclusion

50 mm

Taping

Fasten cable clamp here.

Taping

10 mm 60 mm

Crimp-on Lug

8NK4

Crimp-on Lug

FV5.5-4

Figure 2-9 Fabricating power cable CVV-S 8X2C

2-7