Furuno FR-2125V Performance Monitor PM-30, Necessary parts PM-30 and OP03-150 Code no

4.4 Performance Monitor PM-30

Necessary parts: PM-30 and OP03-150 (Code no. 008-485-490)

Contents of Performance Monitor Kit OP03-150

Name	Type	Qty	Code No.
PM-IN Board	03P9225	1	008-487-620
Pan-head Screw B	M3X8 C2700W	3	000-881-404
Connector Assy.	VH3P-L300-AA	2	000-141-014

1.Open the monitor and fix it with the stay. See Chapter 1 for instructions.

2.Fasten the PM Board 03P9225 to the location shown below with three screws (M3X8).

J403

PM Board 03P9225

J401

J411J402

Figure 4-15 Display unit, inside view

3.Connect J411 to J401 on the PM Board.

4.Connect two connector assemblies (VH3P-L300-AA) to J402 and J403.

5.Solder the other end of the connector assemblies with external cables, one from ship’s mains and one from the PM-30.

6.Close the monitor.

4-15