Furuno FR-2125V installation manual Leading cables into the display unit

Leading cables into the display unit

The cable clamp may be positioned within the display unit (default arrangement), outside the display unit or at the bottom of the display unit (when using console mount, for example). When the cable clamp is located outside or beneath the dis- play unit, use the bottom clamp front plate and bottom clamp rear plate (supplied with installation materials).

Also, use the shielding foam (supplied) to guard against noise.

Cable fed from rear of display unit (Default method)

				Pan-head screw
			Hex bolt	M4X8
Nav equipment		Slave display	M5X12 SUS,	(D) Rear clamp
			2 pcs	plate
(Gyrocompass)
Keyboard		Navigation	Hex bolt	(C) Signal clamp
				(Aluminum)
			M5X35 SUS,
Log
	ANT		2 pcs
PWR
		External CRT	Hex bolt
				(B) Power clamp
			M5X35 SUS,
Cable position in clamp			2 pcs	(Aluminum)
(Display unit, rear view)
				(A) Rear clamp
			(Construction of	base
			cable clamp)
(D) Rear clamp plate

Make sure foam contacts rear chassis.

(C) Signal cableRear cable entrance (Aluminum)

(B) Power clamp (Aluminum)

Cable

(A) Rear clamp base Shielding foam

(Display unit, right-hand side view)

(Display unit, rear view)

Figure 2-10 Default cable clamp position

•Place shielding foam between cables, and then attach foam to aluminum clamps.

•Fill unused clamp holes with shielding foam.

2-8