Group Dialing, Creating Groups | GE D780 manual

GROUP DIAL 03=

Group Dialing

Creating Groups

• The Function key will light up by pressing Function to be able to operate Clear.

NOTE

1Press Additional Functions.

2Use 4 (–)or e (+) to select 4.ADD.

REGISTRATION.

ADDITIONAL FUNCTIONS 4.ADD. REGISTRATION

3Press Set.

ADD. REGISTRATION 1.1-TOUCH SPD DIAL

4Use 4 (–)or e (+) to select 3.GROUP DIAL.

ADD. REGISTRATION 3.GROUP DIAL

5Press Set.

	GROUP DIAL
Ex:	01=1-TOUCH SPD DIAL
Ex:

6Select a one-touch speed dialing key or coded speed dialing code under which you want to register the group.

❚To register a group under a one-touch speed dialing key:

Use 4 (–)or e (+) to select the key under which you want to register the group (01 to 12).

Ex:

•If a one-touch speed dialing key has already been registered, 1-TOUCH SPD DIAL or GROUP DIAL appears.

•If the fax functions have been programmed into the keys marked 01 to 12 using PROG 1-TOUCH KEY in the Additional Functions, PROG 1-TOUCH KEY will appear.

❚To register a group under a coded speed dialing code:

Press Coded Dial, then use the numeric keys to enter the code under which you want to register the group (00 to 99).

GROUP DIAL

Ex: A21=

•If a coded speed dialing code has already been registered, CODED SPD DIAL or GROUP DIAL

3

Speed Dialing

	• If you wish to register a group under the			appears.
NOTE	already registered one-touch speed dialing		Press Set twice.
	key or coded speed dialing code, or you	7	Press Set twice.
	want to re-enter a group, you must delete
	want to re-enter a group, you must delete			GROUP	DIAL
	the previous information first. (→ pp. 3-3,			GROUP	DIAL
	the previous information first. (→ pp. 3-3,			1.TEL	NUMBER ENTRY
	3-5, 3-6)			1.TEL	NUMBER ENTRY
	3-5, 3-6)
	• Do not register a group under a one-touch
	• Do not register a group under a one-touch			TEL=
	speed dialing key or coded speed dialing
	code, in which SUBADDRESS TX or
	POLLING RX has been set. If you do so,
	you cannot send faxes to the other party’s
	which have a subaddress registered.

3-7

Image 30

GE D780 manual Group Dialing, Creating Groups, Use 4 -or e + to select 3.GROUP Dial

Contents

Fax Guide Using Your Documentation CopyrightTrademarks Page Contents Setting the Additional Functions Special FeaturesTroubleshooting Appendix Specifications Pre-Installation Requirements for Canon Facsimile Equipment Users in the U.S.AConnection of the Equipment Case of Equipment Malfunction Rights of the Telephone CompanyFCC Notice Users in Canada Order Information For Canadian Users Type Conventions Used in This Guide TX/RX noPage Introduction Customer SupportOperation Panel Fax Monitor Key Connecting the Telephone Line and an External Device Standby DisplayMaking Connections External Device Connections Drpd Guidelines for Entering Numbers, Letters and Symbols Registering InformationMethods of Registering Information in the Machine Correcting a Mistake Letter you want What is Sender Information? Registering Required Sender Information Entering the Date and Time Registering Your Fax/Telephone Number and NamePress Additional Functions Use 4 -or e + to select 2.UNIT Name Use 4 -or e + to select 7.PRINT Lists Setting the Telephone Line Type Press Set three timesUse 4 -or e + to select 2.TEL Page What is Speed Dialing? Speed Dialing Use 4 -or e + to select 4.ADD One-Touch Speed DialingRegistering Numbers for One-Touch Speed Dialing Use 4 -or e + to select a one-touch speed dialing key 01 to Changing/Deleting a One-Touch Speed Dialing Entry To Change a One-Touch Speed Dialing EntryTo Delete a One-Touch Speed Dialing Entry Use 4 -or e + to select 2.CODED Coded Speed DialingRegistering Numbers for Coded Speed Dialing Use 4 -or e + to select a coded speed dialing code 00 to Changing/Deleting a Coded Speed Dialing Entry To Change a Coded Speed Dialing Entry To Delete a Coded Speed Dialing Entry Use 4 -or e + to select 3.GROUP Dial Group DialingCreating Groups To register a group under a one-touch speed dialing key To continue registering other groups, press Additional Functions then repeat the procedure from stepTo enter a destination registered for coded speed dialing If you want to delete one of these numbers from the group Use 4 -or e + to select 2.SPEED Speed Dialing ListsPrinting Speed Dialing Lists Use 4 -or e + to select the list you want to print Touch Detail Press Set Use 4 -or e + to select 7.PRINT Canceling the Print Out ListUse 4 -or e + to select 3.CANCEL Press Use 4 -or e + to select on Registering a Password and SubaddressUse 4 -or e + to select Use 4 -or e + to select 2.TX Type Enter a password Enter a subaddressPage Press FAX Resolution to select Press Set Adjusting the Quality of Your FaxesSetting the Scanning Resolution Sending Faxes Dialing Methods Regular Dialing5 7 9 5 1 1 1 One-Touch Speed Dialing Coded Speed Dialing Press Directory Group DialingDirectory Dialing Press 4 -or e + to display the other names Memory Sending Stop/Reset then pressSending Methods Dial the other party’s fax number Press Set Dial the other party’s fax number Press FAX to set to Fax ModePress Function Press Book Sending Press Start to begin scanning Press Stop/Reset Canceling SendingCanceling memory sending Press Function Press Fax Monitor Canceling Automatic Redialing Redialing When the Line is BusyCanceling Manual Redialing Manual Redialing One-touch speed dialing Sequential BroadcastingSending a Document to More Than One Destination Coded speed dialing Press Start Delayed Sending Press Function Press Delayed TransmissionFunction and then Book Sending , Confirming Transmission Status and Sending Reservation Confirming Transmission StatusConfirming Sending Reservation Press Function Documents Stored in MemoryPrinting a List of Documents in Memory Press Memory Reference Use 4 -or e + to select 4.RESEND Resending a Document in MemoryPress Function Press Memory Reference Enter the fax number Press Set Printing a Document in Memory Use 4 -or e + to select 3.PRINT Deleting a Document from Memory Use 4 -or e + to select 5.DELETEPress 4 -to delete the document Receive Mode Main Use Operation Requirements Receiving FaxesDifferent Ways to Receive a Fax Press Receive Mode until the mode you Press Set Want appears Setting the Options for FaxTel Mode What Happens When FaxTel Mode is Selected Use 4 -or e + to select 4.RX Use 4 -or e + to select 2.FAX/TEL OPT.SETUse 4 -or e + to select Receive or Types of Ring Patterns Receiving Faxes Manually If you hear a person’s voiceIf you hear a slow beep tone or silence Registering a Password and Subaddress for Polling Use 4 -or e + to select Polling RX Polling RX 1.PASSWORD Password Press 4 -to cancel receiving Receiving Faxes in Memory When a Problem OccursCanceling Receiving Receiving While Performing Other TasksPage Special Features Special DialingDialing an Overseas Number With Pauses Switching Temporarily to Tone Dialing Report or List Reports and ListsSummary of Reports and Lists Description Activity Report Press Report TX Transmission Report Slerexe Company Limited RX Reception Report Multi TX/RX Transaction Report Message TroubleshootingLCD Messages Cause You cannot send a fax Faxing ProblemsSending Problems Faxes sent from the machine are spotted or dirty Errors occur frequently while sending Receiving ProblemsCannot send using Error Correction Mode ECM Cannot receive a fax automatically Cannot receive a document manually Cannot receive using Error Correction Mode ECMErrors occur frequently while receiving Print quality is poor You cannot dial Telephone ProblemsIf a Power Cut Occurs Telephone disconnects while you are talking If You Cannot Solve the Problem Press Additional Functions to display the menus Setting the Additional FunctionsUnderstanding the Additional Functions Press 4 -or e + to select the menu you want to change Menu Descriptions Name Descriptions Copy Settings FAX Settings Print Error only Receive Double Ring RX to Memory ADD. Registration Timer Settings Specifications TelephonePage Canceling Index Document Memory List Memory Clear Report RX Report Standard Memo Canon Deutschland GmbH Canon Italia S.p.A