6-2
Switching Temporarily to Tone Dialing
Many information services for banks, airline reservations, hotel reservations, etc., require tone dialing for their
services. If your machine is connected to a rotary pulse line, follow this procedure to set the machine temporarily
for tone dialing:
1Press FAX to set to Fax Mode.
Ex:
2Pick up the handset of your telephone.
3Enter a destination using the numeric keys
on your telephone or using a one-touch
speed dialing key, coded speed dialing
code, Redial/Pause key or the numeric keys
on the machine.
4When the recorded message of the
information service answers, press T
(Tone)to switch to tone dialing.
Ex:
When T(Tone) is pressed, Tis displayed in the
LCD.
If your telephone line uses tone dialing, go to the
next step.
5Use the numeric keys on the machine to
enter the numbers requested by the
information service.
Ex:
Numbers entered after pressing T(Tone)will be
dialed using tone dialing.
After pressing T(Tone), you cannot use the
numeric keys on the telephone. Use the numeric
keys on the machine.
6If you want to receive faxes, press Start.
7Hang up to disconnect the call.
Tone dialing is canceled when you disconnect the
call.
TEL= T34
TEL= T
FAX 12/03/2003 15:30
FaxTel STANDARD
06 FAX_Chp6.qxd 03.7.10 3:59 PM Page 6-2