Henny Penny PFE-592, PFE-590 manual Clean the gasket and gasket seat with hot water

Model PFE- 590/592

3-13. PREVENTIVE	Reversing Lid Gasket (Continued)
MAINTENANCE
Continued)

Be sure the metal arm on the left side of the lid is in the vertical position holding the lid upright, or severe injuries could result. (See photo at left.)

3.Using a thin blade screwdriver, pry out the gasket at the corners. Remove the gasket.

Check the gasket for any tears or nicks. If the gasket is damaged, it needs to be replaced.

4.Clean the gasket and gasket seat with hot water.

5.Rotate the gasket with the opposite side facing out.

Install the 4 corners of the lid gasket. Smooth the gasket into place, working from the corners towards the middle of each side.

Lubricating Lid Rollers -Annually

The lid rollers, in the back of the fryer, should be lubricated at least once a year, to allow the lid easy movement.

1.Remove the back shroud of the fryer.

2.Using spindle lube, part number 12124, place a small amount of lube on both top and bottom rollers. Make sure to lube both left and right rollers.

3-17 703