Henny Penny PFE-590, PFE-592 manual After the load compensation, press and release the

		Model PFE- 590/592
3-14. PROGRAMMING	8.	After the load compensation, press and release the
(Continued)		FUNCTION button. “PROP” and “CONTROL” shows on
		the left side of the display and the factory preset proportional
		control temperature shows on the right side of the display.
	9.	After the proportional control, press and release the
		FUNCTION button. “ALM 1” and “TIME” flashes in
		the left side of the display, and the first alarm time shows
		on the right side of the display. To change the time the
		alarm sounds, press the appropriate product buttons to set
		the time. Ex: Press 1,0,0,0. 10:00 flashes on the right
		side of the display, which means when the timer counts
		down to 10 minutes, an alarm will sound.
	10.	After alarm is set, press and release the FUNCTION
		button. “ALM 1”, “SELF-’’, and “CANCEL” flashes
		in the left side of the display and “YES” or “NO” shows
		on the right side of the display. The yes and no can be
		toggled by pressing any of the product buttons, (l -0).
		“YES” means the alarm tone automatically stops after
		several beeps. “NO” means someone must manually
		press the appropriate product button to stop the alarm
		tone.
	11.	Repeat steps 9 and 10 for alarms 2 and 3.
	12.	After alarm 3 is set, press and release the FUNCTION
		button. “FILTER” and “CYCLES” shows on the left side
		of the display and the filter cycle value is on the right side

of the display. The value is the number of Cook Cycles that must completed before the control signals the operator that the shortening needs filtered

403 3-20