Hitachi CP-X200 instruction manual －30

B－30

B30

Appendix B

Appendix B

List of Holding Registers

Func.	Name	R/W		Description		Network Data
Code					Reg.	Range	Res.
A104	[OI]-[L] input active	R/W	The ending point (offset) for the		1084h	0 to 100	1 %
	range end voltage		current input range,
			range is 0. to 100.%
A105	[OI]-[L] input start	R/W	Two options; select codes:		1085h	0, 1	
	frequency enable		00	Use offset (A101 value)
			01	Use 0Hz
A141	A input select for	R/W	Five options:		108Eh	0 to 4	
	calculate function		00	Digital operator
			01	Keypad potentiometer
			02	[O] input
			03	[OI] input
			04	Network variable
A142	B input select for	R/W	Five options:		108Fh	0 to 4	
	calculate function		00	Digital operator
			01	Keypad potentiometer
			02	[O] input
			03	[OI] input
			04	Network variable
A143	Calculation symbol	R/W	Calculates a value based on the		1090h	0, 1, 2	
			A input source (A141 selects) and
			B input source (A142 selects).
			Three options:
			00	ADD (A input + B input)
			01	SUB (A input - B input)
			02	MUL (A input * B input)
A145	ADD frequency	R/W	An offset value that is applied to		1091h	0 to 4000	0.1 Hz
			the output frequency when the
			[ADD] terminal is ON.
			Range is 0.0 to 400.0 Hz
A146	ADD direction select	R/W	Two options:		1093h	0, 1	
			00	Plus (adds A145 value to the
			output frequency setting)
			01	Minus (subtracts A145 value
			from the output frequency etting)
A151	POT active range start	R/W	The output frequency		1095h	0 to 4000	0.1 Hz
	frequency		corresponding to the POT range
			starting point,
			range is 0.0 to 400.0 Hz
A152	POT input active range	R/W	The output frequency		1097h	0 to 4000	0.1 Hz
	end frequency		corresponding to the POT range
			ending point,
			range is 0.0 to 400.0 Hz
A153	POT input active range	R/W	The starting point (offset) for the		1098h	0 to 100	1 %
	start		POT range, range is 0. to 100.%
A154	POT input active range	R/W	The ending point (offset) for the		1099h	0 to 100	1 %
	end		POT range, range is 0. to 100.%
A155	POT input start	R/W	Two options; select codes:		109Ah	0, 1	
	frequency enable		00	Use offset (A151 value)
			01	Use 0Hz

Note 1: When the value is 10000 (100.0 seconds), a value in the second decimal place is ignored. (for A092/A292 and A093/A293).