Hitachi CP-X200 instruction manual －33 B33

B－33 B33

List of Holding Registers

Func.	Name	R/W		Description		Network Data
Code					Reg.	Range	Res.
B052	OV-LAD Stop level of	R/W	Setting the OV-LAD stop level of		10CBh	0 to 10000	0.1 V
	non stop operation		non stop operation. Range is 0.0
	setting		to 1000.0
B053	Deceleration time of	R/W	Range is 0.1 to 3000		10CCh	1 to 30000	0.1 sec
	non stop operation
	setting	R/W	Setting of the first quick
B054	Frequency width of				10CEh	0 to 100	0.1 Hz
	quick deceleration		deceleration width. Range is 0.0
	setting		to 10.0
B055	DC bus AVR P-gain	R/W	Proportional gain adjustment for		1173h	2 to 50	0.1
			DC bus AVR function. Range is:
			0.2 to 5.0
B056	DC bus AVR I-time	R/W	Integration time adjustment for		1174h	0 to 1500	0.1s
			DC bus AVR function. Range is:
			0.0 to 150.0
B080	[AM]analog signal gain	R/W	Adjust of analog output at		10CFh	0 to 255	
			terminal [AM],
			range is 0 to 255
B082	Start frequency	R/W	Sets the starting frequency for		10D1h	5 to 99	0.1 Hz
	adjustment		the inverter output, range is 0.5
			to 9.9 Hz
B083	Carrier frequency	R/W	Sets the PWM carrier (internal		10D2h	20 to 120	0.1 Hz
	setting		switching frequency), range is
			2.0 to 12.0 kHz
B084	Initialization mode	R/W	Select the type of initialization to		10D3h	0, 1, 2	
	(parameters or trip		occur, three option codes:
	history)		00	Trip history clear
			01	Parameter initialization
			02 Trip history clear and
				parameter initialization
B085	Country for	R/W	Select default parameter values		10D4h		
	initialization		for country on initialization,
			three option codes:
			00	Japan
			01	Europe
			02	US

Appendix B