5K320 SATA OEM Specification
Setting
Initialize device parameters
Power Management Feature Set Standby Timer
Security mode state
Set max address
Set feature
Set multiple mode
Table 38 Preserved Software Setting
Contents
Track length
Number of head
Number of cylinder
Capacity
Time to fall into standby mode
Security freeze lock
Security unlock
Capacity
Write Cache Enable/Disable
Set Transfer Mode
Advanced Power Management Enable/Disable
Read
Reverting to Defaults
Block size
12.16Native Command Queuing
Native Command Queuing feature (Read / Write FPDMA Queued commands) is supported. Please refer to the Serial ATA II Specification about Native Command Queuing.
The host shall not issue a legacy ATA command while a native queued command is outstanding. Upon receiving a legacy ATA command while a native queued command is outstanding, the device aborts the command and halts command processing of outstanding native queued commands.
12.17SMART Command Transport (SCT)
SMART Command Transport (SCT) feature set is supported. The SMART Read Log and SMART Write Log commands or Read Log Ext and Write Log Ext commands are used to issue a command in this feature sets. Log page E0h is used to issue commands and return status. Log page E1h is used to transport data. Please refer to the section 8 SCT Command Transport in
The following Action codes are supported.
Action code
0002h
Description
Write Same command
- 70 -