5K320 SATA OEM Specification
14.52Write Sector(s) (30h/31h)
Command Block Output Registers |
|
|
|
|
|
| Command Block Input Registers |
|
|
|
|
|
|
| |||
Register | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | Register | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
Data | - | - | - | - | - | - | - | - | Data | - | - | - | - | - | - | - | - |
Feature | - | - | - | - | - | - | - | - | Error |
|
| ...See Below... |
|
| |||
Sector Count | V V V V V V V V | Sector Count | V V V V V V | V V | |||||||||||||
LBA Low | V V V V V V V V | LBA Low | V V V V V V | V V | |||||||||||||
LBA Mid | V V V V V V V V | LBA Mid | V V V V V V | V V | |||||||||||||
LBA High | V V V V V V V V | LBA High | V V V V V V | V V | |||||||||||||
Device | - | L | - | - H H H H | Device | - | - | - | - | H | H | H | H | ||||
Command | 0 | 0 | 1 | 1 | 0 | 0 | 0 | R | Status |
|
| ...See Below... |
|
| |||
Error Register
7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
CRC | UNC | 0 | IDN | 0 | ABT | T0N | AM |
|
|
|
|
|
|
| N |
0 | 0 | 0 | V | 0 | V | 0 | 0 |
Table 136 Write Sector(s) Command (30h/31h)
Status Register
7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
BSY | RDY | DF | DSC | DRQ | COR | IDX | ERR |
0 | V | V | V | - | 0 | 0 | V |
The Write Sector(s) command transfers one or more sectors from the host to the device, then the data is written to the disk media.
The sectors are transferred through the Data Register 16 bits at a time.
If an uncorrectable error occurs, the write will be terminated at the failing sector, when the auto reassign function is disable.
Output Parameters To The Device
Sector Count | The number of continuous sectors to be transferred. If zero is specified, then 256 sectors |
LBA Low | will be transferred. |
The sector number of the first sector to be transferred. (L=0) | |
LBA High/Mid | In LBA mode, this register contains LBA bits 0 - 7. (L=1) |
The cylinder number of the first sector to be transferred. (L=0) | |
H | In LBA mode, this register contains LBA bits 8 - 15 (Mid), 16 - 23 (High). (L=1) |
The head number of the first sector to be transferred. (L=0) | |
R | In LBA mode, this register contains LBA bits 24 - 27. (L=1) |
The retry bit, but this bit is ignored. | |
Input Parameters From The Device | |
Sector Count | The number of requested sectors not transferred. This will be zero, unless |
| |
| an unrecoverable error occurs. |
LBA Low | The sector number of the last transferred sector. (L=0) |
LBA High/Mid | In LBA mode, this register contains current LBA bits 0 - 7. (L=1) |
The cylinder number of the last transferred sector. (L=0) | |
| In LBA mode, this register contains current LBA bits 8 - 15 (Mid), 16 - 23 (High). |
H | (L=1) |
The head number of the last transferred sector. (L=0)In LBA mode, this register | |
| contains current LBA bits 24 - 27. (L=1) |
171
