HotBrick VPN 800/8 F manual Dynamic DNS Service, Additional settings, WAN Port Binding

HotBrick, Tel: 305 -398-0888, Fax: 305-398-5966

Dynamic DNS Service

This pull-down menu can Enable/Disable the Dynamic DNS feature, and select the required service provider.

Disable – Dynamic DNS is not used.

TZO – Select this to use the TZO service (www.tzo.com). You must configure the TZO section of this screen.

DynDNS – Select this to use the standard service (from www.dyndns.org or another provider). You must configure the Standard Client section of this screen.

3322(in China) – This service is available in China. It is similar to “DynDNS”

User Defined DDNS Server – This is the user defined DDNS server. If the DDNS is not TZO, dyndns.org and 3322.

Additional settings

These options are available if using the standard client.

Enable Wildcard – If selected, traffic sent to sub-domains (of your Domain name) will also be forwarded to you.

Enable backup MX – If enabled, you must enter the Mail Exchanger address below.

Mail Exchanger – If the setting above is enabled, enter the address of the backup Mail Exchanger.

WAN Port Binding

Select the WAN port used by the Dynamic DNS service.

The "Force Update" button will update your record on the Dynamic DNS Server immediately.

35