HotBrick manual VPN 800/8 F To 401VPNX2 or LB-2

HotBrick, Tel: 305 -398-0888, Fax: 305-398-5966

Appendix D : IPSec Tunnel Examples

VPN Configuration – Examples

Tunnel to HotBrick Unit

VPN 800/8 F To: 401VPNX2 or LB-2

The HotBrick units in the following example use registered IP addresses. You have to replace these addresses with IP addresses that are available to you. These settings are only possible if you have a static IP address available on one or both of your WAN ports.

This example takes a tunnel between a VPN 800/8 F and a LB-2 VPN. This example applies to the

HotBrick 401VPN X2, LB-2 VPN and 800/8 F series, you can use either unit at both sides. You can use the IP addresses from the network diagram above.

This type of tunnel is named a LAN to LAN IPSec tunnels.

76