HotBrick, Tel: 305 -398-0888, Fax: 305-398-5966
First we will make settings in the VPN 800/8 F
Next we will make settings for the
Note : you need different subnets at both ends of the tunnel. This is because the IPSec tunnel will connect the two subnets so they need to be different in order to avoid IP address conflicts.
These are all the settings you need to setup the tunnel. You can push the connect buttons at one of the locations, this unit will be initiator of the tunnel, the other unit will be the responder. You can check the tunnel status in the SA list. Information about key lifetimes and these kind of things you can find by pushing the tunnel status button in VPN Configuration – Advanced settings.
77
