HotBrick, Tel: 305
-
398
-
0888, Fax: 305
-
398
-
5966
Policy Name List – When addinga new Policy, ignore this list. To edit an existing entry, select it from
thelist and then click the"Select" button.Thedata fieldswill beupdated with data for the selected
entry.
Policy Name – Enter a suitable name. Generally, you should use the"Policy Name" for thenetwork
traffic typefor ease of identification.
Source Address – Definethe source address of packets here. It has two types: IP address or MAC
address. If you select IP address you can definetheIP address range; otherwise you can define
up to four MAC addresses.
Destination Address– Definethe destination address of packets here. The explanation is as thesame
as above.
Protocol Type– Thefield defines traffic packet type, i.e. IP, TCP and UDP.
Source Port – Define the source port of the packets here.
Destination Port – Define thedestination port of thepackets here.
Priority Queue– Determines if a packet meets all conditions defined above andwill beserviced with a
defined
57