HotBrick, Tel: 305 -398-0888, Fax: 305-398-5966
Management Asssistant – Syslog
This feature can send real time system information on the web page or to the specified PC.
Syslog Delivery
Sending out – Check this, if you want to send syslog messages to another machine.
Keep Sent messages – Check this if you want to keep sent messages; otherwise the sent message will be deleted.
Syslog Server - IP address: Up to 3 syslog servers can be used.
Enable: You can enable or disable each server temporarily.
Port: If your syslog does not use the default port, change it here.
Log Priority for modules - The messages are grouped into 8 priority levels, from Emergency to Debug. The lower the level, the fewer messages will be generated. Emergency is the lowest priority level, and Debug is the highest. Setting the priority to Debug will send all generated messages.
SNTP Configuration
Time Zone - You can setup system time using SNTP ( Simple Network Time Protocol), and you can define 3 SNTP servers on the SNTP configuration.
61
