HotBrick, Tel: 305
Rear Panel
Figure 1-3: Rear Panel
AC 100V ~ 240V Connect to AC100~240V / 50~60Hz with AC power cord.
Default Settings
When the VPN800/8 F Firewall has finished booting, all configuration settings will initially be set to the factory defaults, including:
IP Address set to its default value of 192.168.1.1, with a Network Mask of 255.255.255.0
DHCP Server is enabled
User Name: admin
Password cleared (no password)
TFTP Download
This setting should be used only if your VPN800/8 F Firewall interface can ’t be accessed, and you wish to restore it by uploading new firmware. In that case use the following procedure:
1.Power on the VPN800/8 F Firewall.
2.Use the supplied Windows utility or a TFTP client program to apply the new firmware. If you are using the supplied Windows TFTP program, the screen will look like the following example.
Figure 1-4: Windows TFTP utility
Enter the name of the firmware upgrade file on your PC, or click the "Browse" button to locate the file.
Enter the LAN IP address of the VPN800/8 F Firewall in the "Server IP" field.
Click "Upgrade Firmware" to send the file to the
3.When uploading is finished the unit should function normally, using the default settings.
9
