HP 3150 manual Document scanner pickup roller removal

Document scanner pickup roller

It is possible to remove the document scanner pickup roller without removing the document release door. However, the steps below detail pickup roller removal with the assumption that the document release door has already been removed.

1Remove the document scanner guide by lifting it up while pressing the two tabs at the left side of the assembly (see Figure 30).

2Use the small flatblade screwdriver to pry the right end of the pickup roller shaft from its plastic mounting.

	Figure 34. Document scanner pickup roller removal
	3 Lift the right end of the pickup roller shaft out of its mounting; the
	left end should follow easily.
Note	Once the pickup roller shaft has been removed, parts can easily fall off
	of the shaft. Upon reinstallation, make sure that all of the parts have
	been replaced on the shaft in the correct order.

106 Removal and replacement EN