HP 3150 manual Pickup roller assembly removal 2

3Using needlenose pliers, pull the bottom of the bushing out (callout 1), then turn it counterclockwise (callout 2) to release it.

2

1

	Figure 55. Pickup roller assembly removal (2 of 2)
	4	Lift the bushing out.
	5	From inside the front of the printer, slide the right side of the
		pickup roller assembly forward, then lift the left side out.
Note	If you replace the pickup roller assembly, also replace the separation
	pad and subpads (order a separation pad and subpads under a single
	order number). See the removal procedures for the separation pad and
	subpads later in this chapter and also see Figure 96, “Paper pickup
	assembly,” in Chapter 7.

EN Internal assemblies 127