Verification steps

Possible problems

Solutions

Is the product ready?

The control panel should function without error messages.

Control panel display an error message, such as “Encoding Error.”

Control panel is not functional.

Consult the list of common messages later in this chapter to correct the error.

Verify that the control panel cable is seated into both the control panel at J9 and the formatter board at J3. If the cable is connected correctly, replace the control panel.

Control panel does not function correctly.

1.Verify that the control panel cable is seated into both the control panel at J9 and the formatter board at J3.

2.Use the extended service menu, if available, to run control panel tests.

3.If, after running control panel tests, the control panel still does not function correctly, replace the control panel.

4.If after replacing the control panel, the control panel still does not function correctly, perform an engine test, which is discussed later in this chapter.

5.If the engine test is not successful, replace the ECU.

-Or-

If the engine test is successful, replace the formatter.

Do engine tests and internal

Engine test is not successful.

Replace the ECU.

reports print?

 

 

Print an engine test, which is

Internal reports do not print.

If the engine test is successful, but

discussed later in this chapter.

 

internal reports do not print,

The engine test should print

 

replace the formatter.

without paper feed problems or

 

 

print quality problems. Also print

Poor print quality.

See “Solving image defects” later

internal reports (follow the

 

in this chapter.

instructions under “To print all

 

 

reports at once” later in this

Paper does not move smoothly

Isolate printer paper path

chapter). The product will print a

through the printer paper path.

problems by performing a paper

phone book report, a menu report,

 

path check, which is discussed

a fax activity report, a

 

later in this chapter.

configuration report, and a test

 

 

report. The test report contains an

Control panel displays an error

Consult the list of common

error log, which documents recent

message.

messages in Chapter 2 to correct

error messages. The error log can

 

the error.

be helpful in verifying operation of

 

 

the product. All internal reports

 

 

should print without paper feed

 

 

problems or print quality problems.

 

 

EN

Basic troubleshooting 149

Page 151
Image 151
HP 3150 manual Is the product ready?, Do engine tests and internal, Reports print?