Paper exit sensor flag
1Remove all covers, the RFI shield, the printer door, the exit roller, the delivery assembly, and fuser pressure plate.
Note | Before proceeding, examine the paper exit sensor flag. It is important |
| to note the position of the spring mechanism on the flag. The spring |
| must be reinstalled to exactly this position, because installing it |
| incorrectly will cause a control panel error message. |
| 2 Remove the paper exit sensor flag by pressing down on the left |
| |
| side and pulling up on the right side. |
To reinstall
Place the left side of the flag in the correct position first, then slide the right side into place, making certain the spring is on top of the flag. If the spring exerts no pressure on the flag, it may require respringing by giving the spring an extra turn before reinstalling. The flag should fit snugly in place.
Figure 50. Paper exit sensor flag replacement
122 Removal and replacement | EN |