HP 3150 manual Front casing removal

Front casing

1Remove all covers, the RFI shield, and the printer door.

2Remove the two (2) screws (callout 1) from the right hinge holder.

Note	The lower screw on each of the hinge holders secures a small metal
	grounding plate. Upon reinstallation, make sure the grounding plates
	are in the correct position.

1

Figure 44. Front casing removal

3Lift the right hinge holder from the frame.

4Repeat the procedure to remove the left hinge holder.

5Lift the front of the product up slightly and press the tabs at the bottom of the product to release the front casing.

6Lift the front casing away from the product.

To reinstall

Make sure that the paper path lever hooks into the face-up/face-down lever correctly.

116 Removal and replacement EN