HP 3150 manual Pressure roller guide removal

Pressure roller

1Remove all covers, the RFI shield, the printer door, the exit roller, the delivery assembly, the fuser pressure plate, the front casing, and the heating element.

2Remove the pressure roller guide by lifting the edge (callout 1) and then rolling it gently backward (callout 2).

Note

Note

1

2

Figure 47. Pressure roller guide removal

3Lift the right end of the pressure roller up and out of the printer chassis.

The right end of the pressure roller is greased.

4The left side will follow easily with the pressure roller gear still attached.

When reinstalling the pressure roller, apply a drop of pressure roller grease to the grounding plate on the right end of the shaft. See Chapter 7, “Parts and diagrams,” for information about ordering pressure roller grease.

EN Internal assemblies 119